Jetzt Diskutieren
Rhabarber - Frostschaden

So ersetzen Sie Spalling Bricks


So ersetzen Sie Spalling Bricks

halten können. Das Einfrieren und Auftauen von Wasser in Ziegelstein kann zu Abplatzungen und Abplatzungen führen, die den Ziegelstein ruinieren.

In diesem Artikel wird erläutert, wie Absplitterungen auf Ziegeln erkannt werden, wodurch diese beschädigt werden. Es zeigt auch, wie Sie Wasser von den Ziegelwänden fernhalten können, um das Problem zu beseitigen, bevor es beginnt. Andernfalls müssen Sie die beschädigten Steine ​​ersetzen.

Beschädigte Ziegel ersetzen

Diese Ziegelmauer unter einem Holzzaun fällt auseinander. Und es ist zu spät, um es zu retten. Die abblätternde Oberfläche ist ein klassisches Beispiel für "Abplatzungen", eine Art von Versagen, die durch Feuchtigkeit und den Gefrier / Auftau-Zyklus verursacht wird. Wasser aus Regenfällen, schmelzendem Schnee oder sogar nassem Boden sättigte den Ziegel irgendwann, wahrscheinlich oft, und gefror im Inneren des Ziegels, als die Temperatur sank. Die leichte Ausdehnung von gefrierendem Wasser zerbrach den Ziegelstein. Durch wiederholtes Einfrieren und Auftauen verbreiterten sich die Risse, bis sich der Ziegel buchstäblich auflöste.

Um diesen Kräften standzuhalten, sind Ziegel, die auf der Außenseite verwendet werden, normalerweise härter und dichter (weniger Feuchtigkeitsabsorption). Wenn Sie gelegentlich einen Ziegelstein in einer Wand sehen, der versagt, ist es oft ein weicher Ziegel, der versehentlich in die Ladung gemischt wurde. Sie haben jedoch einen massiven Fehler, was auf ein ernsthaftes Eindringen von Wasser hindeutet. Das Problem ist wahrscheinlich kein schlechter Stein.

Die Außenwände müssen sorgfältig ausgearbeitet werden, um das Wasser draußen zu halten, insbesondere wenn sie Teil einer Stützmauer sind. Das offensichtlichste Element, das in Ihrem Fall fehlt, ist eine Kappe oder eine Kappe an der Wand, um den Regen draußen zu halten.

Diese besteht aus Metallabdichtungen, Beton oder Spezialziegeln, die abgewinkelt sind, um das Wasser von der Oberseite der Wand wegzuleiten. Die Kappe war vielleicht schon einmal da, aber sie wurde entfernt oder verschlissen. Darüber hinaus fängt der Holzzaun wahrscheinlich noch mehr Wasser auf und richtet es auf die Wand.

Wenn Sie Ihre Ziegelmauer neu bauen lassen, stellen Sie sicher, dass sie so konstruiert ist, dass sie das Eindringen von Wasser minimiert. Zusätzlich zu einer Kappe auf der Oberseite sollte es eine gute Drainagefüllung (Kies) entlang der Rückseite haben und Löcher entlang des Bodens wässern, um den Wasserdruck zu entlasten, wenn der Boden gesättigt ist. Die Feuchtigkeit auf der Rückseite der Wand wird auch dazu beitragen, das Wasser draußen zu halten. Und eine gute Drainage um die Basis herum verhindert, dass Wasser von unten eindringt.

Erforderliche Werkzeuge für dieses Projekt

Lassen Sie sich die notwendigen Werkzeuge für dieses DIY-Projekt zusammenstellen, bevor Sie beginnen - Sie sparen Zeit und Frustration.

  • Kreissäge
  • Kaltmeißel
  • Staubmaske
  • Verlängerungskabel
  • Hammer
  • Gehörschutz
  • Stufe
  • Schutzbrille
  • Vorschlaghammer
  • Spaten
  • Band Messen Sie
  • Kelle
  • Mehrzweckmesser
  • Schubkarre
Sie benötigen auch eine Mauerklinge für Ihre Kreissäge, um den Stein zu schneiden

Erforderliche Materialien für dieses Projekt

Last-Minute-Einkaufsfahrten vermeiden indem Sie alle Ihre Materialien im Voraus bereit haben.Hier ist eine Liste.

  • Ziegel
  • Fliese ablassen
  • Kies
  • Landschaftsstoff
  • Mörtel
So ersetzen Sie Spalling Bricks

FAQ - 💬

❓ Do spalling bricks need to be replaced?

👉 Spalling brick can be repaired if it hasn't gotten so bad that there is very little brick left to repair. If you are missing most of the brick then it may be time to do a brick replacement like in the video below.

❓ Can you fix spalling bricks?

👉 The best and one of the easiest ways to do this is to apply a masonry sealant to the bricks which is specially designed to allow the bricks to breathe. You can also prevent spalling by making sure that you have installed proper drainage around the house so that water does not come near the foundation.

❓ Is brick spalling serious?

👉 Water and mold go hand-in-hand, and spalling bricks can easily cause mold to spread to the surrounding area. This is a huge health risk and also looks terrible. Not only is spalling, a health and safety hazard, if left alone too long, your pockets are in danger too.

❓ Why are my bricks flaking?

👉 The flaking surface is a classic example of “spalling,” a type of failure caused by moisture and the freeze/thaw cycle. Water from rainfall, melting snow or even wet soil saturated the brick at some point, probably often, and froze inside the brick when the temperature dropped.

❓ How much does it cost to repair brick spalling?

👉 Spalling brick repair cost Spalling brick repair costs $1,000 to $3,500 for up to 100 square feet or $250 to $450 minimum for small sections. Masons replace spalling bricks to prevent future brick crumbling. Contractors must also fix the initial spalling causes like moisture issues or improper mortar usage.

❓ Is spalling concrete structural?

👉 Spalling can ruin the structural integrity of the concrete and compromise any supported loads.

❓ Can you repair damaged brick face?

👉 Mix the repair mortar with water. Use 1 part of water with 4 to 5 parts of powder. Apply in layers up to 20mm thick; final layer should stand proud of brick surface and given time to cure. After curing and for up to 48hrs after application, mortar can be sanded and shaped as required.

❓ What does brick spalling look like?

👉 If you're looking at your house and your bricks are crumbling or flaking, you've got a problem. Brick spalling is when the surface of a brick flakes off. The brick is deteriorating due to the cycle of freezing and thawing moisture.

❓ Why are the bricks on my house crumbling?

👉 It happens when bricks absorb moisture, then freeze before they dry out. Water, like most liquids, contracts as it cools. But when water reaches about 39 degrees Fahrenheit, it expands slightly as it reaches freezing temperature.

❓ Is concrete spalling serious?

👉 Spalling concrete is dangerous, trust us. For those unaware, the spalling of concrete, in layperson terms, can be described as flaking or breaking apart of the concrete from its structure, as a result exposing the interior reinforcing materials to the atmosphere.

❓ Will spalling concrete get worse?

👉 As weather changes, the concrete expands, causing it to spall, which leads to further deterioration. One technique that can prevent concrete from spalling is to apply a good water sealant to the finished surface to prevent water from entering into the concrete.

❓ How to repair spalling bricks?

👉 Misting of the existing mortar can also be a good measure as a brick spalling treatment and the best repair as well. Spalling bricks is the series problem, can turn the brick to a soft powder. But if one follows the prevention step, the huge problem can be avoided.

❓ What is spalling masonry and what causes spalling?

👉 We know masonry and can replace spalling bricks expertly and affordably. What Causes “Spalling”? When a brick starts to fall apart as evidenced by a flaking surface and begins to literally disintegrate, this is known as spalling. Spalling occurs when moisture from rain, melting snow, or even wet soil saturate and penetrate the brick.

❓ How do you fix a broken brick wall?

👉 Use a chisel, hammer, or power drill with a masonry cutting wheel to remove the spalling or loose bricks. Use your chisel to extract the old mortar as well. Watch the following video to see how individual damaged bricks are removed and replaced.

❓ Why is my brick wall falling apart?

👉 When a brick starts to fall apart as evidenced by a flaking surface and begins to literally disintegrate, this is known as spalling. Spalling occurs when moisture from rain, melting snow, or even wet soil saturate and penetrate the brick.


Autor Des Artikels: Alexander Schulz. Unabhängiger Konstrukteur und technischer Experte. Arbeitserfahrung in der Baubranche seit 1980. Fachkompetenz in den Richtungen: Bau, Architektur, Design, Hausbau.

Video-Anleitung: Spalling Bricks caused by Portland Cement.


Teilen Sie Mit Ihren Freunden
Kommentar Hinzufügen